Using Call

Running an Outbound Dialer Campaign in Call, Step by Step

Plan, build and run an outbound calling campaign in Call: the list, the script, dialling modes, retries, machine detection and the checks every call passes.

Call editorial team · Published · 5 min read

An outbound campaign is easy to start and hard to run well. Anyone can load a list and press dial. What separates a campaign that earns replies from one that annoys people is the planning behind it: who you call, why, at what pace, and what happens when nobody answers. This guide walks through building and running a campaign in Call, from the first list to the first review.

An outbound calling team at their desks, each wearing a headset and working through a call list
Illustrative image

If you are new to outbound work, begin with Outbound Calling Basics and Predictive vs Progressive vs Preview Dialers. Here we focus on how the pieces fit in Call.

Plan before you build

Write the answers to four questions before touching the software. They decide everything that follows.

Four questions to answer first

  • Who is on the list?People who have a reason to expect your call, with a number you are allowed to use.
  • What is the purpose?One outcome per campaign: book a visit, confirm an interest, collect feedback.
  • What counts as success?A number you will check, such as calls connected or visits booked.
  • What happens to the answer?Who follows up, and by when?

A narrow purpose gives a shorter script, a clearer outcome list and an easier review. If you want to do three things, run three campaigns. Related reading: Warm Calls vs Cold Calls and Keeping Calling Lists Clean.

Build the campaign in Call

From empty to ready

  1. Create the campaignIn Campaigns, then Call campaigns, press New campaign. Enter a name, choose the product or service, the type (Outbound, Inbound or Mixed) and a daily call target.
  2. Add the listPut contacts into the campaign from Prospects, either one by one or by importing a CSV and choosing the campaign.
  3. Attach the scriptWrite or draw the script and use it as the campaign's calling instructions.
  4. Check the rulesConfirm calling hours, do-not-call lists and attempt limits are respected before you start.

The campaign page does not dial by itself. It tracks prospects, calls, sales and today's calls against the daily target. Calls are placed from the dialer, from outbound call agents or from a contact's page, and each passes every check on the way. New campaigns start active, and you can Pause or Mark done at any time.

Importing is pasted CSV text with a header row. A number already on your do-not-call list is imported with the stage Do not call instead of being dropped, which keeps the record honest. See Importing Contacts Without Making a Mess.

Scripts and outcomes

Calls need words. A script for an outbound call should open with who is calling and why, handle the usual replies, and have a clear path for a person who asks not to be called again. Keep it short; the agent says each step in its own words, so the script is guidance rather than a recording. Read How to Write a Sales Call Script and Writing and Using Call Scripts in Call.

After each call, the person or agent records an outcome. Decide your outcomes in advance and keep them few: for example connected, not interested, call back, no answer and do not call. A long outcome list produces inconsistent data and weakens every report.

Choose a dialling mode

Dialler ops lets a manager choose how a campaign is paced. The mode applies to the whole campaign, not to one agent.

Dialling modes

Preview or ProgressivePower or Predictive
How it worksThe agent sees the record and decides when to dial, or the next record dials once wrap-up endsA fixed number of lines per free agent, or dialling ahead throttled by the measured abandon rate
Best forValuable conversations, careful research, small teamsLarge lists, short calls, big teams
Main riskSlower throughputAnswered calls with nobody free to take them

Dialling faster than agents become free is what abandons calls, and the abandon ceiling is a legal limit in many places. Start with Preview or Progressive. Move to a faster mode only when the team is large enough to absorb the pace and you have watched the Abandon rate tile stay under its ceiling.

Retries and answering machines

Most calls are not answered. A retry policy says how long to wait before calling a number again after each outcome, and how many attempts to allow. In Dialler ops you set the wait in minutes and the maximum attempts for No answer, Busy, Voicemail and Callback, and can rotate the time of day so you do not call at the same hour again. A busy signal and a voicemail deserve different waits.

Answering-machine detection is optional. When it is on, the carrier classifies the answer and the result is recorded on the call. You can choose a recorded message to leave on a machine, or hang up. The carrier's verdict can be wrong, so nothing should be played to a person who has just said hello. Leave messages short and honest; see Leaving Voicemails That Get Returned.

Watching a campaign run

When the list runs low, use Top up list to add phone-book contacts with a number who are not won, lost or do-not-call. Recycle no-answers returns records that ended with no answer, busy or voicemail and have rested long enough. Both counts are reported on screen. The page refreshes its figures every ten seconds.

If a campaign needs to stop quickly, a supervisor can use the stop-all switch described in The Stop-All Switch: Pausing Every Outbound Call at Once, and a batch can be paused and resumed from Outbound call agents.

Calling lawfully and politely

Outbound calling is regulated in most countries. Rules cover who may be called, at what hours, how often, whether consent is needed, whether automated or AI voices may be used, and how callers must identify themselves. Call applies calling hours in the contact's local time and refuses numbers on suppression lists, but it cannot decide your legal basis for calling someone in the first place.

See also AI Outbound Calls: Uses and Cautions and Designing an Outbound Call Cadence.

Review after the first day

Campaign review checklist

  • Did the connect rate match what you expected, or is the list poor?
  • Did the abandon rate stay under its ceiling?
  • Which outcome was most common, and does it match the purpose?
  • Were any numbers refused, and why? Fix the cause, not the symptom.
  • Did anyone ask not to be called, and are they on the suppression list?
  • What one change will you make for tomorrow?

Keep changes small and one at a time. Changing the list, the script and the pace together tells you nothing about which one worked. A weekly look at Outbound Metrics That Matter will show whether the trend is right.

Frequently asked questions

Does the campaign page dial calls by itself?

No. It groups contacts and tracks progress. Calls are placed from the dialer, Outbound call agents or a contact's page, and each one passes every check.

Which dialling mode should I start with?

Start with Preview or Progressive. They keep an agent in control of pace. Move to Power or Predictive only when the team is large and you have watched the abandon rate.

What does the retry policy control?

For each outcome, such as No answer or Busy, it sets the wait in minutes before another attempt and the maximum attempts. Retries still pass every calling rule.

Can Call detect answering machines?

It can ask the carrier to classify the answer and record the result. The verdict can be wrong, so choose what to leave on a machine carefully, or simply hang up.

What if the list runs out?

Use Top up list to add eligible contacts, or Recycle no-answers to return records that rested long enough. A warning appears when the list is about to run out.

Who can create a campaign?

Owners, admins and managers can create campaigns. Agents work the calls.

Set up your first outbound campaign in Call

In the demo console you can try incoming calls in a simulation.

Related guides