Answering Calls in Call: The Inbound Banner, Pickup and Wrap-Up
A practical walk-through of taking an inbound call in Call: going on the phone, answering or declining, handling a second call, holds, and logging the outcome.
The first ten seconds of an inbound call set the tone. The caller wants a person who is ready, who sounds calm and who already knows how to use their tools. Most of that comes down to habits: being on the phone before the first call, knowing what the incoming-call prompt offers and having a routine for the moments after the call ends.

This guide follows one call from start to finish: getting ready, the incoming-call prompt, picking up, managing the call, wrapping up, and handling the unusual cases such as a second caller or a call left on hold. The final section maps each step to the screens in Call. For the human side of the conversation, see Opening and Closing a Call.
Before the first call: get ready
Good call handling starts before anything rings. A few minutes at the start of a shift prevent most of the problems that happen mid-call.
Start-of-shift checklist
- Headset plugged in and the right microphone and speaker chosen
- Microphone allowed in the browser when asked
- Status set to available, and only when you really are
- Customer notes, scripts or knowledge articles open in another tab
- Phone bar switched on so incoming calls can reach you
Echo and background noise are the most common audio complaints. Use a headset rather than speakers, close windows and doors if you can, and test with a colleague before the queue opens. If your team uses a quiet room for calls, say so in the rota, so people book it.
The incoming-call prompt
When a call is offered to you, you are shown a prompt with the choices Answer or Decline. It appears over your work, so you do not need to be on any particular page. The phone bar stays on screen while you move between pages, which means a call does not end because you opened another screen.
What to check in the first second
Look at whatever the prompt shows about the caller or line. Is it a known customer, a particular line or a queue with a special greeting? That determines how you open: with a company name, with a department or with an alternative greeting for a premium line. If nothing is shown, use your standard greeting.
Answer or decline?
Answer in almost every case. Decline only when you cannot give the call your attention, for example in an emergency in your own room. A declined call moves on to someone else or to the next step in the queue's rules, so it is not lost, but repeated declines hurt your teammates and your callers.
Taking the call
- Prompt appearsThe incoming-call prompt shows Answer and Decline.
- AnswerPress Answer and greet the caller with your standard opening.
- Listen firstLet the caller state the reason before you search for anything.
- Look up and actOpen the customer record or knowledge article while you keep talking.
- Close and logSummarise, confirm next steps and record the outcome.
When a second call arrives
Sometimes a second call arrives while you are already talking. The prompt offers a way to put the first caller on hold and take the new one. Use it sparingly. A caller on hold hears silence or music and gets nervous quickly, so tell the first caller what is happening and promise to return in a moment.
- Say "May I put you on hold for a moment? Another line is ringing." and wait for the answer if you can.
- Take the second call, ask for name and number if the matter is long, and promise a call-back if you cannot help right away.
- Return to the first caller within a minute, and thank them for waiting.
- If this happens often, tell your supervisor; it usually means the queue needs more people.
During the call: hold, mute, keypad, transfer
The controls under a live call are simple, and each has a polite way of being used.
| Control | Use it for | Good practice |
|---|---|---|
| Hold | Looking something up, or a short interruption | Ask first, give a time, return often |
| Mute | Background noise or a sneeze | Never leave the caller on a muted line without telling them |
| Keypad | Sending tones, for example to an automated menu | Say what you are doing and why |
| Transfer | Passing the call to a colleague who is available | Tell the caller who they will speak to and why |
Transfers deserve extra care. The best transfers are warm: you tell your colleague who is calling and what the matter is before the caller is connected, so the caller does not have to repeat everything. Where that is not possible, tell the caller exactly what will happen and give them a fallback if the line drops. Hold and Transfer Etiquette goes through the wording.
Wrapping up: the minutes after the call
When the call ends, the work is not finished. A short wrap-up window, sometimes called after-call work, is where you record what happened. Skipping it means the next person who deals with this customer starts blind.
Choose an outcome that matches what happened, such as interested, callback, sale, not interested, voicemail or wrong number. If a call-back was promised, set the time. Then write the notes: what the caller wanted, what you did and what you promised. Short, factual notes are far more useful than long ones. If you use note templates, insert one and fill it in.
A good wrap-up note answers four questions
- What did they want?One line in the caller's own words.
- What did we do?The action, and the result.
- What did we promise?Any deadline or call-back, with a date.
- What is still open?Anything the next person needs to finish.
A wrap-up countdown keeps this honest: it gives you a short, fixed time to finish. If you regularly run out, tell your supervisor, because the target may be unrealistic for your call types. After-Call Work Time covers how teams set it.
Unusual cases
Calls left on hold
Calls can be parked, for example while a colleague is found, and then forgotten. Nobody is waiting in a queue for them and no alert fires, so someone has to look. Make checking parked calls part of your routine, and always tell the parked caller who will return.
A caller who asked for a person
If your line is first answered by an AI agent and a caller asks for a person during business hours, people you choose are rung at once and the first to answer takes the call. If nobody answers, the caller can leave a message and the request is recorded for follow-up. When you pick up one of these, expect that the caller may already have explained their issue to the AI, so ask what they need rather than starting from scratch.
Calling a colleague
Sometimes you need an answer from someone inside the company while a customer waits. An internal call between two browser phones uses no phone number and never goes out over a phone line, so it is a quick way to ask a question. Always put the customer on hold first.
Doing it in Call
In Call, the phone bar sits at the bottom of every page. Press Go on the phone and allow the microphone if the browser asks. When a call comes in, press Answer or Decline; if a second call arrives, the option to hold the first and take the new call is offered. During a call you have Mute, Keypad and Hang up, and in the Dialer you also get Hold, Resume and Transfer, where the transfer list shows colleagues who are active and available. Press Go off the phone when you stop taking calls. Your own status (available, on a call, do not disturb, on break or offline) is set from the foot of the menu, and a supervisor can also change it from the Supervisor screen.
When a call ends, the After-call work panel shows a countdown if a wrap-up time is set. Choose the Outcome, set the Callback time if needed, add Notes or insert a template, and press Log outcome. Calls parked by someone appear under Inbound ops, in Calls left on hold, with the slot, the caller, who parked them and how long they have waited; press Pick it up to take the call. Missed calls and voicemail appear there too. To connect the pieces, read Setting Up Call Queues: Members, Priority and Overflow and Getting Started with Call.
Frequently asked questions
What if I miss the incoming-call prompt?
The call is offered to someone else or follows the next step in the queue's rules. Check your missed calls and voicemail afterwards, and call back where you can.
Do I have to stay on one page to receive calls?
No. The phone bar stays on screen while you move between pages, so you can take a call wherever you are in the app, as long as you are on the phone.
Why does my caller hear echo?
Usually because the other person's voice is coming out of your speakers and back into your microphone. Use a headset, and check that the right microphone and speaker are selected.
How long should I spend on wrap-up?
As long as it takes to record the outcome, the notes and any promised call-back, and no longer. If your wrap-up time is too short for your call types, raise it with your supervisor.
Should I decline calls when I am busy?
Rather than decline, set your status to do not disturb or on break before you stop being available. Declining leaves the caller waiting a little longer while the call is offered elsewhere.
What is the best way to hand a caller to a colleague?
A warm transfer. Tell the colleague who is calling and why, then connect the caller, so they do not have to repeat themselves.