Using Call

Live Listen and Joining Calls for Supervisors in Call

How supervisors in Call can listen to a live call, read the live transcript, step in on an AI-handled call, and what the tools do and do not do.

Call editorial team · Published · 5 min read

A dashboard tells you that a queue is busy. Only a call tells you why. Live listening is the tool supervisors use to understand what is happening right now: a new starter on a difficult conversation, an AI agent that has misunderstood a caller, an upset customer who needs a senior voice. Used with care, it makes support better. Used without care, it makes agents feel watched.

A contact centre supervisor wearing a headset watching a wall of live call activity
Illustrative image

This guide explains what live listening is for, how to do it in Call, how joining works on AI-handled calls, and the etiquette that keeps the trust of your team. For the bigger picture of what supervisors watch, see What Contact Center Supervisors Should Monitor.

When live listening is worth it

Listen live when the information would change what you do in the next few minutes. Otherwise, a recording and a review afterwards is calmer and fairer.

Good reasons to listen

  • A new starterSupport them on early calls so small mistakes do not become habits.
  • A flagged callAn alert or a long wait suggests something is wrong right now.
  • An AI-handled callCheck that your AI agent is understanding the caller and answering properly.
  • A sensitive momentA complaint or vulnerable caller where a senior person may need to take over.

Poor reasons include idle curiosity and general surveillance. If you would be uncomfortable explaining why you listened, do not. Agents should know that live monitoring exists and when it is used. Pair it with a clear monitoring notice for callers, as described in Call Recording Notices: Examples and Practice.

Listening in Call

Open Supervisor under Calls. It is shown to admins and managers in Full mode. In Calls in progress, press Listen on a call to open its live panel. You can also open a call still in progress from Call history and use Listen live.

Listening to a live call

  1. Open the callPress Listen on the call in Calls in progress.
  2. Start listeningPress Listen live. It shows Connecting, then Listening to both sides.
  3. Control the audioMute speaker silences the audio in your browser without ending the call.
  4. Follow the transcriptRead the Live transcript beside the audio, and close the panel to stop.

Your microphone is not connected while you listen, so the caller and agent cannot hear you. Staff can see a marker such as Supervisor listening on the call in Easy mode's call history, so the activity is visible to colleagues even though callers are not told who is listening.

Things that can stop it working

Joining a call your AI agent is handling

When an AI agent answers a call, a supervisor can step in. Turn on the browser phone first and allow your microphone. Then open the call and press Join call. The caller hears you and the AI pauses; the panel shows that a supervisor is on the call.

Stepping in and stepping out

  1. Get readyTurn on the browser phone in the bar at the top of the screen.
  2. JoinPress Join call and confirm. The AI stops talking.
  3. DecideHandle the call yourself, or press Hand back to AI to let the agent continue.
  4. Or put throughChoose a transfer target, warm or cold, and press Put through.

A warm transfer tells the person before the caller is connected; a cold transfer connects the caller straight away. A transfer target's own setting is the starting choice. Afterwards the call record shows who put it through, to whom, and how it ended. To design the handover itself, read Handing a Call from the AI Agent to a Person.

What live listening does not do

Be honest with your team about the limits. Whisper, which would let a supervisor speak to the agent only, is not available with the current phone service; the attempt is recorded but nobody is actually listening. If you need to coach during a call, join it or use another channel agreed with the agent. What a supervisor says on a joined call is not transcribed, and there is no live recording of a call while it is still in progress.

Plan a small routine so that listening is fair and regular rather than reactive. For example, each supervisor might listen to a few minutes of several agents across a shift, always on a pre-announced basis, and write down one positive and one development point for each. This avoids the common problem where only struggling agents are ever monitored, which quickly feels like punishment.

Etiquette that keeps trust

  1. Tell agents when and why live listening is used, ideally in writing.
  2. Never listen to a personal call or to a colleague you have a conflict with.
  3. Give feedback privately and soon, and start with what went well.
  4. Look for patterns, not single moments. One awkward call is not a performance issue.
  5. Do not use what you hear for anything other than the stated purpose.

The coaching side is covered in A Simple Framework for Coaching Agents on Calls.

What to listen for

When you do listen, have a short list in your head so you do not drift. Listening without a focus produces vague impressions; listening for three things produces notes you can use.

For an AI-handled call, change the list. Ask whether the agent understood the request, whether it answered from your own material, and whether it handed over when it should have. Joining at the right moment is a skill; a good rule is to step in when the caller has asked for a person, when the call is going in circles, or when the topic is one the AI should not handle. Read What AI Receptionists Can't Do, and When to Hand Off for the boundaries.

Accountability and records

Every Listen, Join and state change is written to a record before the call or person is touched, and appears under What supervisors have done on the Supervisor screen. That protects agents and supervisors alike. It also means access should be limited to the people who need it. See Access Controls for Contact Center Staff for how to think about it.

Before you start monitoring live calls

  • Agents have been told monitoring exists and how it is used.
  • Callers hear a notice where your rules require one.
  • The phone service is connected so live audio works on real calls.
  • Only owners, admins and managers who need it have access.
  • You know how to join, hand back and transfer on an AI-handled call.

Frequently asked questions

Can callers hear a supervisor who is listening?

No. When you press Listen live, your microphone is not connected, so neither caller nor agent hears you. Staff may see a marker that a supervisor is listening.

Who can listen to calls in Call?

Owners, admins and managers. The Supervisor screen is shown to admins and managers in Full mode.

Can I coach an agent privately during a call?

Whisper is not available with the current phone service. You can join the call or give feedback afterwards through a channel agreed with the agent.

What happens when I join an AI-handled call?

The caller hears you and the AI pauses. You can hand the call back to the AI or put the caller through to a transfer target, warm or cold.

Why does it say live audio is only for phone calls?

Live audio works on real phone calls carried by the phone service. Browser test calls and simulated calls show the transcript only.

Is monitoring recorded?

Yes. Every listen, join and state change is recorded against your name and shown under What supervisors have done.

Monitor live calls from the Supervisor screen in Call

In the demo console you can try incoming calls in a simulation.

Related guides