Contact center

Questions to Ask Before Choosing Contact Center Software

A practical list of questions to put to any contact center software vendor, from telephony and routing to reporting, data, support and exit terms.

Call editorial team · Published · 7 min read

Choosing contact center software is easier than it looks and harder than it should be. Every vendor demonstrates a polished inbound call, a tidy dashboard and a friendly AI. What separates tools is what the demo does not show: how the system behaves on a busy Monday, how long a new agent takes to learn it, and how hard it is to leave.

A small team around a table comparing notes on a laptop during a software demonstration
Illustrative image

This checklist is a set of questions to ask during an evaluation. It is not a scorecard that names winners. Your team, your call volume and your channels decide what matters, so the first section is about you, not the vendor. If you are still deciding whether to change at all, read the contact center digital transformation guide first.

Start with your own needs

Before any demo, write one page that describes how calls actually flow today. Vendors will happily fill a vague brief with their own strengths. A specific brief makes them answer your questions instead.

Mark each item as must have, nice to have or not needed. This single step removes more bad options than any feature comparison.

Telephony and call routing

Voice is still the foundation. Ask how calls reach the system and what happens when something goes wrong.

Ask the vendor to build one of your real call flows during the call, using your hours and your queues. A tool that needs a consultant for a two-level phone menu will also need one for every change you make later. For menu design basics, see IVR menu design.

A short way to test routing in a demo

  1. Describe one real flowGive the vendor your hours, your two or three queues and one holiday rule.
  2. Watch them build itNote how many screens and how many minutes it takes.
  3. Change it liveAsk them to move one option to a different queue.
  4. Call itPlace a test call from a mobile and check what you hear.
  5. Break itClose the queue and call again to see the after-hours path.

The agent and supervisor experience

The people who use the tool all day will decide whether it succeeds. A system that looks tidy to a manager can be slow and confusing for an agent with a caller waiting.

If possible, let two of your own agents try the tool for an hour with test calls. Their questions are more useful than any feature list. See an agent onboarding plan for what a good first week looks like.

AI features: ask what is real

Almost every vendor now mentions AI. The risk is paying attention to the label rather than the behaviour. Ask for specifics.

Questions about AI features

  • What exactly does it do?Summaries, transcripts, answering calls, suggesting replies: each is a different feature with different risks.
  • Where does it get its facts?A voice agent should answer from sources you control, and say so when it does not know.
  • How does a caller reach a person?Ask to see the handoff, including what the agent receives about the conversation.
  • What can you review?You should be able to read transcripts, correct answers and test before going live.
  • What does it refuse to do?A responsible tool states its limits plainly, for example that it will not confirm a booking on its own.

Treat any claim that AI will replace your team with caution. Useful AI usually removes repetitive work such as typing notes or answering the same opening hours question, and leaves judgement to people. For background, see what AI phone reception is and voice AI guardrails.

Data, privacy and access control

Call recordings and transcripts hold personal information. You are responsible for it even when the vendor stores it. Ask direct questions and ask for written answers.

A vendor that cannot answer these questions clearly is telling you something. Related reading: access controls in a contact center and keeping call data for the right length of time.

Reporting and integrations

You will manage by what you can see. Ask which numbers the system calculates for you and which you must build in a spreadsheet.

AreaWhat to askWhy it matters
Live viewCan a supervisor see queues and agent status in real time?Staffing decisions happen during the day, not after it.
HistoryCan we filter calls by line, agent, outcome and period?Finding a specific call quickly saves hours.
ExportCan we download calls and reports in a common file format?You will always need a spreadsheet for something.
DefinitionsHow is a missed or abandoned call counted?Two tools can report different numbers for the same day.
ConnectionsIs there an open API and webhooks, or only fixed connectors?Your CRM or ticketing tool may be unusual.

Ask what the definitions are before comparing numbers across vendors. For common measures, see the contact center KPI list.

Cost, support and leaving

Cost is more than the price per seat. Ask how charges are made up without needing exact figures at this stage: per user, per minute, per number, for storage, for AI usage, for extra channels. Then ask the vendor to explain a typical month for a team like yours, in writing.

Two ways to read a quote

Looks cheapCosts more later
SeatsLow seat priceFeatures you need sold as extra modules
UsageMinutes bundled for the first monthsHeavy usage priced separately
SupportEmail onlyPhone or chat help only on a higher tier
ContractLong term, easy to startHard to leave, with fees to export data

Run a pilot before you commit

A pilot turns opinions into evidence. Keep it short, small and real. Two weeks with a handful of agents, one or two queues and a clear list of things to check is enough.

Pilot checklist

  • Real numbers forwarded to the new system for part of the day
  • Agents trained with the vendor's own help material, not a private walkthrough
  • At least one after-hours and one holiday test
  • A reporting review at the end of week one
  • A recorded list of problems with the vendor's response time to each
  • A decision date agreed in advance

Afterwards, hold a short review with the agents who took part. Ask what slowed them down and what they would miss. Then plan the move with a contact center migration plan and make sure someone owns the change management side.

How Call fits these questions

Call is a cloud call-centre system with inbound and outbound calling, IVR, queues, a dialler, quality and workforce management, AI call summaries, a CRM, a shared inbox and appointments. You can use the questions above on it like any other tool: open the in-app help articles, check how business hours and queues are configured, review call history, and try the roles and permissions before deciding. Where a feature has limits, the help articles state them in plain words, which is a good habit to look for in any vendor.

Frequently asked questions

How many vendors should we compare?

Three is usually enough. Fewer leaves you without a reference point and more leads to demo fatigue. Compare them against the same written brief.

Should we ask for a free trial?

Yes, and use it with real calls from a few agents. A trial that only runs on test data hides the problems that matter, such as audio quality and how fast the screens respond.

Do we need an open API?

Only if you have tools to connect that fixed connectors will not reach. Decide this from your list of must-have integrations rather than from a feature table.

How do we compare AI claims between vendors?

Ask each vendor to run the same five real caller questions and show the answers, the sources used and what happens when the AI does not know. Compare behaviour, not wording.

Who should be in the evaluation?

At least one agent, one supervisor, whoever owns your customer data and whoever pays the bill. Each group notices different problems.

What is the most common mistake in an evaluation?

Buying on the demo. The demo shows the happy path, so test the awkward cases: a closed queue, a transfer that fails, an agent who leaves and a report you did not plan for.

See how Call handles these questions in a free trial

In the demo console you can try incoming calls in a simulation.

Related guides