KPIs and metrics

Agent Occupancy vs Utilization: Definitions, Uses and Pitfalls

How agent occupancy and utilization differ, how each is calculated, what ranges to watch for, why very high values hurt, and how to use them to plan fairly.

Call editorial team · Published · 5 min read

Two reports show the same team. One says the agents were busy for most of the day. The other says they were busy for less than half. Both can be correct, because "busy" was measured against different time. Occupancy and utilization are close cousins that get confused all the time.

Agents at their desks in a call centre, some on calls and others waiting for the next one
Illustrative image

This guide separates the two, shows how to calculate each, explains healthy ranges and warning signs, and gives advice on using them wisely. It relates to Schedule Adherence, Workforce Management Basics and Preventing Agent Burnout.

The two definitions

Occupancy and utilization side by side

OccupancyUtilization
Question it answersWhen agents were available for contacts, how much of that time were they handling them?How much of the agent's paid or scheduled time was spent on contact handling?
Typical baseLogged-in time available for contactsPaid time, scheduled time or shift length
What it ignoresBreaks, meetings, training and offline timeLittle: it includes almost everything
Who it helpsPlanners judging how hard the queue works agentsManagers judging how productively paid time is used
Main riskVery high values mean no breathing spaceLow values may reflect legitimate non-call work

Different vendors define these terms differently, and some use the words interchangeably. Before you compare numbers across teams or tools, write down the formula behind each.

How to calculate them

Handling time includes talk time, hold time and after-call work. Available time is the time an agent is ready for contacts, whether handling or waiting for the next one.

Occupancy versus utilization in a hypothetical shift

  1. Collect the timesSay an agent is logged in for 7 hours, spends 5 hours handling calls and 2 hours waiting between calls.
  2. OccupancyHandling time divided by handling plus waiting time: 5 divided by 7.
  3. Add the offline timeThe shift was 8 hours paid, with 1 hour for breaks and training.
  4. UtilizationHandling time divided by paid time: 5 divided by 8.
  5. CompareOccupancy is higher than utilization because it leaves out the offline hour.

This example is invented to show the difference. Real shifts vary, and the figures you need depend on your definitions.

What ranges to watch

There is no universal best number. Teams tend to see the following pattern:

The tolerable level depends on how demanding the calls are. A team taking emotionally heavy calls needs more breathing space than one answering simple status queries. Very large teams can run higher occupancy than small ones because arrivals even out over many agents, while a small team has more idle time at the same service level.

Why you should not push occupancy to the maximum

What very high occupancy costs

  • QualityAgents rush, skip steps and give less thoughtful answers.
  • WellbeingNo recovery time after hard calls leads to fatigue and sickness.
  • ResilienceWith no slack, any surge pushes waits up sharply.
  • RetentionPeople leave jobs that give them no pause.
  • LearningNo time for coaching, notes or knowledge updates.

Planning models such as Erlang C use occupancy as a natural result of staffing at a given service level. If your occupancy is very high, the model is telling you the team is too small for your target. See Erlang C Explained.

Shrinkage and why it matters here

Planners use the word shrinkage for time that agents are paid for but cannot take calls: breaks, meetings, training, holidays and sickness. It sits between a paid-time view and an available-time view, which is exactly why utilization and occupancy differ. If you plan staffing from handling time alone and forget shrinkage, the team will be too small, occupancy will run higher than you expected and waits will grow. Estimate shrinkage from real history, not hope, and revisit it each season.

Be honest about the non-call work too. Agents who also answer email or chat, make callbacks or update a knowledge base are productive even when no call is in progress. If those tasks are not counted, utilization will understate the work being done and may push managers to cut the very activities that keep quality up.

Using utilization sensibly

Utilization is useful for budgeting and for spotting time lost outside contact handling. But it can be misleading if the team has legitimate non-call work: coaching, project work, email or outbound follow-up. If you track utilization, define what counts as productive and include the non-call work that you want people to do.

A hypothetical case

Suppose a six-person team shows a very high occupancy every afternoon and a low one every morning. Nobody is lazy in the morning or superhuman in the afternoon; calls simply arrive late in the day. The fix is not to push the morning staff harder. It is to move some start times later, put training and follow-up work into the morning, and check that afternoon breaks are protected.

After a few weeks the team sees occupancy balance out, afternoon waits shorten and agents report calls feeling more manageable. Once more, this is an illustration with invented figures, but patterns like it are common.

Improving both measures sensibly

Adjust the system, not the agents

  1. Match schedules to demandShift staff to the half hours where calls arrive; see Forecasting Call Volume.
  2. Use quiet timeSchedule training, coaching and follow-up where the forecast shows slack.
  3. Reduce avoidable workFewer repeat calls and shorter after-call work free capacity.
  4. Protect recoveryPlan short breaks after heavy calls and avoid back-to-back queues all day.
  5. Review regularlyCheck the numbers each month alongside quality and staff feedback.

Occupancy and utilization review

  • Write down the formula and time base behind each report
  • Look at occupancy by half hour, not only by day
  • Compare team results, not individual rankings
  • Check whether very high periods line up with quality drops
  • Plan non-call work into quiet periods
  • Revisit staffing if occupancy stays very high
  • Ask agents how busy time feels

Finally, talk to the team. Agents know when a shift pattern leaves them exhausted or idle long before a report says so. Ask them which hours feel overloaded and which feel empty, and compare their answers with the figures.

Doing it in Call

The Workforce page in Call compares the staff you need with the staff you have scheduled for a day, and shows the roster and an Adherence and occupancy panel. Occupancy is colour-coded: lower values show green, higher values amber and very high values red, so you can see where agents are being pushed hard. Staffing ops shows, today, who is out of adherence and how the day compares with plan, with the surplus hours that could be released when a day runs lighter than planned. Look at the definitions shown on those screens before you compare them with figures from another tool.

Frequently asked questions

What is the difference between occupancy and utilization?

Occupancy compares handling time with the time agents were available for contacts. Utilization compares handling time with a wider base such as paid or scheduled time. Definitions vary between tools, so check each report.

What is a healthy occupancy?

There is no single number. Moderate to high values with gaps for recovery are healthy; values near the maximum for long stretches are a warning. Calls that are emotionally demanding need more slack.

Can I use occupancy to rank agents?

It is better not to. Occupancy mostly reflects call arrival and schedule, not individual effort. Use it to plan staffing and look at quality measures for individuals.

Why does occupancy go up when we cut staff?

The same calls are shared by fewer people, so each is busy more of the time. That may be intended, but watch quality, wait times and burnout.

Is low utilization always bad?

No. Paid time includes breaks, training, coaching and other legitimate work. Low utilization is a prompt to ask where the time goes, not proof of waste.

How are these measures related to service level?

To hit a given service level you need enough agents, and occupancy is what results from that staffing. Chasing very high occupancy tends to push service level down when demand surges.

Check occupancy and adherence figures by day in Call

In the demo console you can try incoming calls in a simulation.

Related guides