Using Call

Using Call's Browser Softphone: Setup, Headsets and Daily Use

How to take and make calls in your browser with Call: first-time setup, headset choices, answering, holding, internal calls and fixing audio problems.

Call editorial team · Published · 5 min read

A softphone is a phone that lives in software. With a browser softphone there is nothing to install: you open a page, allow the microphone and you are on the phone. For small teams, remote staff and anyone who moves between desks, it is the simplest way to get people calling. This guide covers setup, daily use and the audio problems you are most likely to meet. For the technology, see how browser calling works.

A remote worker wearing a headset and taking a call on a laptop at home
Illustrative image

What you need before you start

A short equipment list

  • A current browserUse an up-to-date desktop browser that allows microphone access for the site.
  • A headsetA wired headset with a microphone near the mouth gives clearer audio than laptop speakers and avoids echo.
  • A stable networkA wired connection or strong Wi-Fi. Calls suffer when the network is busy or weak.
  • A quiet placeBackground noise reaches the caller and makes speech recognition worse too.

A headset is the one purchase worth making properly. Laptop microphones pick up keyboard clicks and room noise, and laptop speakers feed into the microphone as echo. Ask the people who will use it all day to try the headset for an hour before you buy more.

Setting up for the first time

From sign-in to your first test

  1. Sign inOpen the app in the browser you will use every day.
  2. Go on the phonePress the button in the phone bar at the bottom of the page and allow the microphone when the browser asks.
  3. Choose devicesOpen preferences and pick your microphone and speaker or headset, or leave them on the system default.
  4. Set your statusMark yourself available so calls can be offered to you.
  5. TestCall a colleague inside the system or ring your own mobile from the line, and listen to both directions.

The microphone prompt only appears once per site. If you click block by mistake, you must change the permission in the browser's site settings. Do this check before your first shift rather than during your first call.

Using it every day

When a call comes in, the phone bar shows it and you answer or decline. During a call you can mute, use the keypad and hang up. If a second call arrives you can put the first on hold and take the new one. Most teams settle quickly into a small set of habits.

You can also call a colleague whose browser phone is on, with no phone number on either side. That is useful for a quick question or a warm handover; the guidance in hold and transfer etiquette applies to internal calls as much as external ones.

Making sure calls reach you

A softphone does not have to be your only device. You can choose where calls ring: this browser, a mobile, a desk phone or a SIP phone, in what order, and how long each rings. Devices in the same position ring together; a later position rings only if the earlier ones do not answer. A phone number is never rung until you have verified it with a code. Set call forwarding for the case when none of your devices answers.

Browser softphone vs desk phone

Browser softphoneDesk phone
SetupOpen a page and allow the microphoneCabling, a power source, provisioning
Where you can workAnywhere with a network and a headsetAt the desk
AudioDepends on headset and networkUsually steady, fixed hardware
RiskBrowser updates and permissionsHardware failure, moves and changes
Suited toRemote, hybrid and small teamsFixed reception and shared desks

Fixing audio problems

Most complaints are about sound. Work through them in order, from the simplest cause to the least likely.

See telephony audio quality for why some problems come from the network between you and the caller rather than from your equipment. If a problem keeps coming back, test with a different browser and a different headset to find which part is at fault.

Before each shift

  • Browser updated, microphone permission allowed
  • Correct headset selected
  • Short test call completed
  • Status set correctly
  • After-call time and idle-break time set as you like
  • Customer record and notes open

A first week for new softphone users

New starters learn the phone faster when the first week has a shape. On day one, set up the headset, run test calls and listen to a few recorded calls from experienced colleagues. On day two, take internal calls only. From day three, take real calls with a colleague listening in, and use the next days to review what happened. By the end of the week, most people know where the controls are without looking.

  1. Day one: headset, permissions, preferences and a test call.
  2. Day two: internal calls, hold and transfer practice.
  3. Day three: real calls with a buddy listening.
  4. Day four: a review of two calls together, one good and one difficult.
  5. Day five: solo shift with a named person to ask.

Give each person a one-page cheat sheet with the three things they will need most: how to go on and off the phone, how to mute, and who to ask when audio fails. Use practice calls and role plays to build confidence; practice calls in Call describes one way to do this safely.

Habits that keep a remote team sounding professional

Treat the softphone like a front desk. Keep a tidy background, close other audio apps and tell the people at home when you are on a call. Agree a back-up plan with your manager: a second device, a phone number to ring if the network fails and a person to tell. Running a remote contact centre covers the team side.

Doing it in Call

In Call, the phone bar at the bottom of every page has a button to go on the phone. Press it, allow the microphone, and calls ring in the browser. You can answer, decline, mute, use the keypad and hang up; a second call can put the first on hold. Preferences, found at the foot of the sidebar, hold the microphone and speaker choices, the after-call work time and the idle break. With no other devices added, calls ring in this browser only. Browser calling must be switched on for the organisation by an operator, so ask your administrator if the button does not appear.

Frequently asked questions

Do I need to install anything?

No. The softphone runs in the browser. You allow microphone access and choose your headset in the preferences.

Why can't the caller hear me?

Most often the browser's microphone permission is blocked, the wrong microphone is selected or you are muted. Check them in that order.

Can I use my mobile as well?

Yes. You can add devices such as a mobile, desk phone or SIP phone, verify each number and choose the order in which they ring.

What happens if I forget to go off the phone?

Calls may keep ringing your browser while nobody is there. Go off the phone when you leave, and use the idle break so your status changes to on break after a period of inactivity.

Is a headset really necessary?

It is not mandatory, but it is the single biggest improvement for audio quality. It removes echo and keeps the microphone close to your mouth.

Can I call a colleague without a phone number?

Yes, if their browser phone is on. You pick them from a list and it rings in their browser.

Go on the phone in your browser with Call

In the demo console you can try incoming calls in a simulation.

Related guides