Outbound and sales calls

Designing an Outbound Call Cadence That Respects Your Prospects

How to plan an outbound call cadence: how many attempts, how far apart, which channels to mix and when to stop, without turning persistence into pressure.

Call editorial team · Published · 5 min read

Most prospects do not answer the first call. Most replies come after a few touches. That is why outbound teams need a cadence: a written plan that says how many attempts to make, how far apart, using which channel, and when to stop. Without one, follow-up depends on each person's memory and mood. Some prospects get chased daily, while others are forgotten after one attempt.

A salesperson at a desk planning a sequence of calls on a wall calendar
Illustrative image

This guide shows how to design a cadence that is effective and fair to the people you call. It assumes you already know the basics from Outbound Call Basics.

What a cadence includes

A cadence has five parts. Write each one down; if the plan only lives in someone's head, it is not a cadence yet.

Parts of a cadence

  • AttemptsThe maximum number of contact tries before the lead is parked or closed.
  • SpacingThe gap between attempts, which usually widens over time.
  • ChannelsWhich touches are calls, voicemails, emails or messages.
  • ContentWhat each touch says or offers, so no two feel identical.
  • Stop rulesWhat ends the sequence: a reply, a no, an opt-out, or the last attempt.

Different leads need different cadences. A person who just filled in a form expects a fast reply. A name from a purchased list needs a lighter touch and a clear reason to speak. See Warm and Cold Outbound Calls for the difference.

How many attempts and how far apart

There is no universal number, and published figures vary widely. Use these principles instead:

A sample cadence for a warm lead

  1. Day 1, within hoursCall. If there is no answer, leave a short voicemail that names the reason for the call.
  2. Day 1, laterSend a short written message with the same reason and a way to reply.
  3. Day 3Call at a different time of day. Offer something new, such as a relevant detail.
  4. Day 7Call again and, if no answer, leave a different voicemail.
  5. Day 14Final call and a written note saying you will not contact them again unless they reply.
  6. After thatPark the lead, record why, and set a later check only if they showed interest.

This is an illustration, not a rule. Test your own and adjust it based on what you learn.

Mixing channels

Calls are only one way to reach someone. People respond to different channels at different times, and a mix lowers the pressure on any single one.

Roles of each touch

CallVoicemailWritten follow-up
StrengthLive conversation, fast answersLeaves your name and reasonEasy to answer when convenient
WeaknessInterrupts, often missedRarely returned unless clearCan be ignored or filtered
Best used forFirst contact and qualificationReminder between callsDetails, links, summaries
Watch forCalling hours and consent rulesLength and clarityOpt-out and sender identity

Read Leaving Voicemails That Get Returned and Following Up a Call with a Useful Email for the craft of the other two touches.

Make every touch add something

Persistence only works if each contact gives the person a reason to respond. Repeating "just checking in" teaches them to ignore you. Aim for a small piece of new value each time.

A hypothetical example: a small training provider follows up an enquiry. The first call asks what they want to learn. The second touch sends dates for the next course. The third offers a short call to talk about fit. The last says the place can be held for a week. Each message has a different purpose, so the sequence feels like service, not pressure.

Think also about who owns each prospect. When two colleagues follow the same lead with different cadences, the person receives double the contact and neither of you knows. Keep one owner per lead, record every touch in the contact's history, and check that history before you dial. A shared view of recent attempts is the simplest guard against accidental over-calling.

Finally, plan for the replies. A cadence that works will produce answers, questions and objections, and someone must be ready to handle them quickly. See Handling Objections on Sales Calls for how to prepare.

Rules and limits you must respect

A cadence has to fit the rules where your prospects are. These vary by country and by the type of call, and they cover calling hours, consent, do-not-call lists, caller ID and frequency limits. Some places limit how many times you may try a number that did not answer.

Measuring and improving the cadence

Treat the first version as a hypothesis. Track what happens at each step and learn from it.

What to review by attempt number

  • How many contacts were reached on attempt one, two, three and later
  • At which attempt most conversations or replies happen
  • Whether voicemails are followed by call-backs
  • How many people opt out or complain, and after which touch
  • Whether time of day or weekday affects the answer rate
  • Whether later attempts produce real conversations or only more no-answers

If almost every result arrives by the third attempt, shorten the cadence. If results keep appearing late, ask whether those are real outcomes or just people saying no. Outbound Call Metrics covers the numbers to track.

Running a cadence in Call

In Call, campaigns group your calling work: each one has a list of prospects, a daily target and progress figures. In Dialler ops you can set a retry policy for each outcome, such as No answer, Busy, Voicemail and Callback, with a wait in minutes, a maximum number of attempts and a Rotate time option so the next try is not at the hour of the last failure. Retries never bypass the rules: every attempt still passes the do-not-call list, calling hours and attempt limits. The after-call form records outcomes and callback times, so the plan for the next touch lives on the contact's record. Written follow-up is up to your team: the call history can draft a follow-up email for you to copy and send from your own mailbox. See Dialler Campaigns in Call.

Frequently asked questions

How many call attempts are enough?

There is no fixed number. Many teams settle on a small handful of calls over two to three weeks and adjust from their own results. The key is to set a maximum and stick to it.

Should I leave a voicemail every time?

Not necessarily. Leave one on the first or second attempt and vary the later ones, or skip them. Several identical voicemails in a row tend to feel like pressure.

What gap between calls works best?

Shorter at first and longer later. Close together while interest is fresh, then a few days, then a week. Test the spacing with your own audience.

When should I stop?

When the person says no, asks you to stop, or you reach your maximum attempts. Record the reason and honour it, and do not restart the sequence without a new reason or a new request.

Does a cadence work for inbound enquiries?

Yes, and speed matters even more. A person who just asked for contact is usually most receptive soon after, so call fast and then space the follow-ups.

How is a cadence different from a script?

A script covers what you say on one call. A cadence covers the whole sequence of contacts. Both should be written down and reviewed.

Set a retry policy for your campaign in Call

In the demo console you can try incoming calls in a simulation.

Related guides