Rules and compliance

UK Silent and Abandoned Calls: What Ofcom Expects From Dialler Users

Silent and abandoned calls explained: what Ofcom's persistent misuse policy expects of UK callers, how dialler settings cause them and how to reduce the risk.

Call editorial team · Published · 5 min read

A person holding a phone to their ear with a puzzled expression
Illustrative image

Almost everyone has picked up a phone, said hello twice and heard nothing, then a click. Silent calls are annoying and can frighten people, especially if they live alone or are vulnerable. They are usually not malicious: they come from automated dialling that connected a call before an agent was free. Because of the harm, UK regulation treats them seriously. This guide explains the terms, the main expectations, the settings that cause problems and what a careful outbound team does. For the technology, read Predictive vs Progressive Dialers.

Silent calls and abandoned calls

The two terms overlap but are not identical.

Silent vs abandoned

Silent callAbandoned call
What happensThe call is answered but the person hears nothingThe system drops the call because no agent is available
Typical causeDialler connects before an agent is ready, or answering machine detection misjudgesDialler places more calls than agents can handle
What the person experiencesSilence, sometimes a clickA ring that stops, or a hang-up after answering
Regulatory concernDistress and nuisance, and no way to identify the callerSame, and repeated calls to the same person

Some abandoned calls cannot be completely avoided with certain dialling methods. The regulatory expectation is therefore to keep them low, handle them courteously, and never let them turn into silence.

What Ofcom's policy expects

Ofcom, the UK communications regulator, can take action against persistent misuse of electronic communications networks. It publishes a statement of policy that sets out how it approaches silent and abandoned calls. The details are updated from time to time, so confirm the current wording before you act; in outline, the policy has these themes:

Marketing calls also fall under the Privacy and Electronic Communications Regulations and rules on the Telephone Preference Service. See Robocall Rules Overview and Opt-Out Management.

How silent calls happen in practice

A typical chain of events

  1. Dialler paces too fastIt places more calls per agent than agents can answer, hoping some will go unanswered.
  2. Many people answer at onceMore people pick up than expected, and there is no free agent.
  3. Answering machine detection misfiresA real person is classified as a machine, and the call is dropped or left silent.
  4. The system connects without an agentThe person answers; nobody speaks.
  5. The same number is called againRepeat attempts turn one nuisance into a pattern.

The root causes are almost always the dialling ratio and detection settings. If you see silent calls, check these before anything else.

Reducing the risk

Controls that help

  • Choose the dialling method carefullyProgressive or preview dialling places a call only when an agent is ready, which largely avoids abandonment.
  • Limit the paceIf you use predictive dialling, cap the ratio and watch the abandon rate in real time.
  • Tune machine detectionUse it with care, test it with real calls, and decide what happens when it is unsure.
  • Play an information messageIf a call must be dropped, play a short message instead of silence.
  • Present a real numberShow a number people can call back, and answer it.
  • Pause on bad numbersStop calling a number after an abandoned or silent attempt until a human can follow up.

Treating the person well

Regulation sets minimum standards, but the best defence is respect. If a person answers and your agent arrives half a second late, an apology and a quick explanation of who you are and why you are calling goes a long way. If they ask not to be called, record it at once. Take extra care with people who may be vulnerable. See Vulnerable Customers on the Phone and Outbound Call Basics. Complaints about silent calls tend to follow predictable patterns, so keep a log and look for them.

A review checklist for outbound teams

Silent call prevention review

  • The dialling method and ratio are chosen deliberately and documented
  • Abandoned calls are measured per campaign and reviewed daily
  • A recorded information message plays when a call must be dropped
  • The message names the business and says how to get in touch or opt out
  • Calls display a number that works for call-backs
  • Answering machine detection has been tested on real call samples
  • Repeat-call rules are set for numbers that were abandoned
  • Complaints are logged and investigated
  • Staff know how to apologise and record opt-outs
  • Settings are re-checked after every change to the dialler

Measuring and reporting abandoned calls

You cannot control what you do not measure. Count live answered calls and abandoned calls for each campaign and each day, and calculate the rate in the way Ofcom's policy describes. Share the figure with the people who run the dialler, not only with compliance staff. If a campaign runs over several days, track it in the way the policy defines the measurement period, since a bad hour can matter as much as a bad month.

Keep the data. Call detail records, dialling settings and the text of your information message are useful if you are ever asked to show what you did. Answer Rate and Abandon Rate explains the measures, and Outbound Metrics shows how to put them into a weekly report.

Silent-call controls in Call

Call's dialler works through lists in modes that you choose, and the modes differ in how much they place at once, so the first decision is the mode. There is also a setting for machine detection and a retry list for numbers to try again, and the dialler does not place a call unless the rules allow it: calling hours, attempt limits and the suppression list are checked before every dial. Calls can be paused or stopped at once, and the dialer shows a reason when a call is refused. Test each mode and the machine detection setting on a small list before running a campaign, and keep your own abandoned-call records. See Dialer Campaigns in Call and Calling Hours Guard.

Frequently asked questions

Is a silent call illegal in the UK?

Silent calls can amount to misuse of a network and be subject to regulatory action, and they can also breach data protection and marketing rules. The details depend on the facts, so check Ofcom's current policy.

What is the difference between a silent call and an abandoned call?

A silent call is answered but nobody speaks. An abandoned call is one the system drops because no agent was ready. Both are problems; the policy expects abandoned calls to be kept low and to play a message.

Does using a progressive dialler remove the risk?

It greatly reduces abandonment, because it places a call only when an agent is available. You still need sensible machine detection settings and records.

Do I need to show my number when calling?

Calling line identification should present a number that people can call back. Hiding it makes it hard for people to identify or complain about the caller.

Who enforces the rules?

Ofcom deals with persistent misuse of networks, and the ICO deals with marketing calls under privacy rules. Their roles and powers can change, so check their websites.

What should I do if a customer complains of silent calls?

Apologise, record the details, check your dialler logs for the time and campaign, and fix the cause. Add the number to your suppression list if they ask not to be called again.

Configure dialling limits and caller checks in Call

In the demo console you can try incoming calls in a simulation.

Related guides